More About the Petrol 5-in-1 Garden Multi-Tool...
The Petrol 5-in-1 garden multi tool is a power tool built to deal with even the toughest gardening tasks. Thisall-in-one tool is perfect for the keen gardener or professional landscaper who needs a reliable piece of equipment to get the job done. The 52cc two-stroke petrol engine can get up to speeds of 10,000rpm, using the add-on attachments to cut through bushes, branches and weeds with no hassle.
The 100cm extension pole can be added to the hedge trimmer and chainsaw giving you an extra 3 metres of reach with an adjustable head, enabling you to get into those hard-to-reach areas. The pruner chainsaw attachment is also easily adjusted thanks to the lock nut and changeable screw. When using the long-reach hedge trimmer you get a clean cut from the precise, double-sided blade. Simply adjust it when you need it and use up to 10 different cutting angles for complete versatility and precision.
Apply the garden trimmer and brush cutter head to trim lawns and hedges with the spool head cutter attachment. Or cut down overgrown weeds with the triple-toothed metal blade. If you decide to buy the 40 tooth cutting blade and circular saw attachments that are also available, this petrol tool's capability is even further enhanced.
Also included with the garden multi - tool is the 52cc petrol base unit, blade guards, protective trimmer guard, a shoulder harness to reduce strain and increase comfort, and a fuel mixing bottle. It also comes with a toolkit that explains how to assemble this power tool and an easy-to-read instruction manual. This is the perfect tool that not only saves space in the shed but also cuts back on costs, without losing any of the functionality you need to keep the garden in fantastic condition.
Engine Type: 2-cycle, air-cooled vertical cylinder
Engine Speed Idle: 3000rpm
Maximum engine speed: 10000rpm
Maximum output: 2.2KW / 3.0HP
Fuel/Oil ratio: 25/1 with 2-cycle engine oil
Fuel tank capacity: 1025ml
Carburetor type: Diaphragm type
Ignition: Flywheel Magneto CDI system
Spark Plug: TORCH BM6A
Air Filter: Semi-Wet, quick remove/install
Starting Method: Recoil
Cooling System: Forced Air
Stopping Method: Slide switch
Transmission Type: Automatic, centrifugal clutch with bevel gear
Dry Weight: 7.0kgs
Tip of Hedge trimmer to engine: 10' 4\" (315cm with extra pole)
Tip of Chainsaw bar/blade to engine: 9' 9\" (300cm with extra pole)
Long Reach Hedge Trimmer: Hardened Steel Double edged blade
Blade Length: 450mm
Adjust to 10 different cutting angles
Comes With blade covers
Cutter Drive: Spur gear
Gear Lubricant: Lithium based grease
Assembly length with cutter: 1700mm
Long Reach Pruning Saw (Small Chainsaw): Useful For Pruning Trees
Chain Guide Bar: 10\", 3/8\" pitch. 043\"gauge
Sprockets: 3/8\" inch, fixed spur
Gearcase Ratio: 1.06:1
Chain Speed: 23.5m/Sec @ 10,000 min-1
Chain Lubrication automatic adjustable oiler
Simple to adjust with the adjusting screw and lock nut
Comes with coverTrimmer: Cutting Diameter approx: 40cm
Handle Type Used: Loop or 'D' handle
Blade Rotation: Counter ClockwiseBrush Cutter: Metal T3 Pronged Blade
Cutting Diameter: 30cm
Extension Pole: 1000mm in Length