Multi-Functional Garden Landscaping Tool
A versatile, all-in-one, garden multi-tool with 52cc two-stroke petrol engine delivering 3.0 horsepower of torque and engine speeds of up to 9,500 rpm. Save money and shed space with chainsaw, grass trimmer and long-reach hedge trimmer attachments all included in one convenient model.
The chainsaw / pruning saw attachment can be adjusted to suit your needs with the adjusting screw and lock nut. Perfect for pruning trees and stubborn bushes. Combined with the extension pole attachment, the chainsaw can offer three metres of reach and will slice through branches with ease.
The dual-purpose garden trimmer brushcutter comes with both a nylon spool head cutter for trimming lawn edges, and a three-toothed metal cutter blade for clearing overgrown weeds. It can be further upgraded too, if required, with circular saw and 40-tooth cutting blade attachments available to buy, to further enhance your grass trimmer capabilities.
The long-reach hedge trimmer comes with two-sided blade, adjustable to 10 different cutting angles for maximum accuracy. Again, by combining with the 100cm extension pole, you can get over 3 metres of reach to keep even the very top of your hedgerow in check.
Package contents include the 52cc petrol base unit, long-reach hedge trimmer, chainsaw, two grass trimmer attachments, 100cm extension pole, protective trimmer guard and blade guards, shoulder harness for maximum comfort and minimum strain, fuel mixing bottle, toolkit complete with everything you need for assembly and adjustments, and easy-to-follow instruction manual.
This product comes with a 12 month warranty.
Long Reach Hedge Trimmer:
- Engine Type: 2-cycle, air-cooled vertical cylinder
- Displacement: 52cc
- Engine Speed Idle: 3000rpm
- Maximum Engine Speed: 9,500rpm
- Maximum Output: 2.2KW / 3.0HP
- Fuel/Oil Ratio: 25/1 with 2-cycle engine oil
- Fuel Tank Capacity: 1025ml
- Carburetor Type: Diaphragm Type
- Ignition: Flywheel Magneto CDI system
- Spark Plug: TORCH BM6A
- Air Filter: Semi-Wet, quick remove/install
- Starting Method: Recoil
- Cooling System: Forced Air
- Stopping Method: Slide Switch
- Transmission Type: Automatic, centrifugal clutch with bevel gear
- Dry Weight: 7.0kgs
- Tip of Hedge trimmer to engine: 10' 4" (315cm with extra pole)
- Tip of Chainsaw bar/blade to engine: 9' 9" (300cm with extra pole)
Long Reach Pruning Saw (Small Chainsaw):
- Hardened Steel Double Edged Blade
- Weight 1.8kg
- Blade Length: 450mm
- Adjust to 10 Different Cutting Angles
- Comes With Blade Covers
- Cutter Drive: Spur Gear
- Gear Lubricant: Lithium Based Grease
- Assembly Length With Cutter: 1700mm
- Useful For Pruning Trees
- Chain Guide Bar: 12", 0.375" pitch. 050"gauge
- Sprockets: 3/8" inch, Fixed Spur
- Gearcase Ratio: 1.06:1
- Chain Speed: 23.5m/Sec @ 10,000 min-1
- Chain Lubrication Automatic Adjustable Oiler
- is Simple to Adjust with the adjusting screw and lock nut
- Comes with Cover
- Cutting Diameter Approx: 40cm
- Material: Nylon, 2.5mm*500cm
- Handle Type Used: Loop or 'D' handle
- Blade Rotation: Counter Clockwise
- Metal T3 Pronged Blade
- Cutting Diameter: 30cm
DELIVERY Your order will be delivered within 2-3 working days. FREE delivery on orders over £200.00*
[*Please note: additional surcharges may apply to some locations.]
CHRISTMAS CLOSURE – We are closed on Monday 25th December 2017, Tuesday 26th December 2017 and Monday 1st January 2018 so please note orders placed during this period may be delayed.
RETURNS Unwanted items can be returned to us within 30 days of receipt for a refund as long as they are unused and in the original packaging. If you want to return an item(s) to us please use the email us function in this help centre to advise us which item(s) and the reason for the return. Our full Returns Policy can be found in the FAQ section of the website.
| 6/6/2017 6:37 pm
Useful Tool Once You Figure It Out!! by The Mountford Handyman
I bought this 5 in 1 petrol multi-tool for my Handyman business. After 2 days of total frustration I am now happy with it's performance. Having painstakingly followed the set up guide I could not get it to run smoothly or at full throttle. It was chucking out loads of smoke and the strimmer attachment wouldn't even fell a daisy!
Conclusion: The instructions state a 25:1 mix for the 2 stroke. This was causing the smoke and lack of power. A 40:1 mix is just the job. It now runs cleanly and at full throttle.
I would also recommend that you purchase a decent fuel mixer bottle (£5 from B&Q). My first attempt with the bottle provided resulted in a fuel shower.
I've only used the streamer head and hedge trimmer so far and they perform well. The extension arm does tend to upset the balance of the machine when used with the hedge trimmer.
On the whole, a good machine.
| 7/9/2015 12:51:00 pm
Value for money,Only downside it's weight by Martyn B
Value for money but down side its weight
Easy to assemble as instructions are very good
| 23/7/2015 2:54:00 pm
Abdul by Abdul
| 19/3/2015 5:01:00 pm
Good value for money and suitable for a fairly large garden by Rob
The ordering and delivery process was very easy.
Assembling the various components was less straightforward since the manual is poorly written/translated and therefore confusing It doesn't help that the manual also covers a fairly extensive number of models. Many of the illustrations are less than illustrative and these could be significantly improved.
The kit works well although the hedge trimmer is rather heavy and cumbersome, especially when working above the waist
| 1/8/2014 11:45:00 pm
Total Gardner by The Griffter
I agree with all of the above, the product is not without degrees of frustration, including massive. However I call it the widow maker of strimmers.
Its awesome. I killed two Ryobi's, clutches went on both of them, but this bad boy will go through anything. Its thirsty but it is 52cc, with performance to match. I love it and the price.
| 25/5/2014 2:32:00 pm
value for money by clive
I struggy to start hot or cold will not start on choke [very thirsty] instruction book u/s but simple to workout . locking the tubes require care to align. very heavy with long attachment; hedge timmer short but for the low price very good .
| 14/8/2013 4:49:00 pm
Very good value by Jedmday
Excellent value. Easy to put together. Does the job.
| 11/7/2013 1:15:00 pm
Does what it meant to do quite well. by OddJob
The basic instructions need a little imaginative interpretation, obviously not written by an English speaker but translated with some strange terminology and poor diagrams. Common sense is required to complete assembly but generally not too challenging but there do seem to have been model updates which have not been updated in the manual. ALSO, the 'plastic' end-of-line fuel filter which sits in the fuel tank 'disolves' in petrol and collapses within a few hours thus making petrol pick-up impossible. Obviously designed by a real genius! Luckily I found the source of the problem and fitted an alternative and got the blasted thing working again. Slightly frustrating on 2nd day of use. This needs looking into by your buyers/techs as it easily renders the machine totally useless for the sake of Â£3 for a non-plastic alternative.
| 15/6/2013 10:58:00 pm
Good but could/should be better by OllieMax
It is not a bad piece of kit and key elements are well engineered. However, some aspects are quite disappointing for a Trueshopping item e.g. the handle has a very odd [incorrect part?] plastic projection that is no use to man nor beast, the foam "air cleaner" arrangement is crude and flimsy, there is inadequate adjustment to balance the unit when on full extension, and, use of the 'button' to keep the throttle lever open is mystifying.
Power is adequate for the tools, taking into account the losses due to various gears when extended.
Be patient with the extensive instructions. Extensive, yes but unfathomably in some areas.
In these days of 'Easystart' the instruction to practice to get the engine to start was a surprise. However, I have had no problems starting.
All-in-all. It is not bad and, I suspect, worth the money. I just wish a little more thought had gone into the design and operation of the various tools.