Page 12 (of 2)
RRP £5.99 Our Price £2.72
Manufactured from Chrome Vanadium steel with 1/2sq drive. Pentagon shaped driver suitable for Citroen and Peugeot callipers.
RRP £13.99 Our Price £10.99
Aids quick removal of disc brake pads. Especially useful where brakes have bound and extraction by hand is difficult. Insert pins in pad and use mini slide hammer to ease pad from calliper.
RRP £13.99 Our Price £7.99
Chrome Vanadium steel economy style brake pad spreader suitable for most ATE, Bendix, Delco and Girling callipers. Use on standard and 4-piston disc brakes. Lightweight design is fast and simple to use.
RRP £4.55 Our Price £2.03
Long reach Chrome Vanadium hex wrench with comfortable handle sleeve for extra leverage. Applications as AK657 plus also BMW (on all but 5 Series) and GM Calibra disc brake pads. Also suitable for gearbox fixings on Ford transverse engines (Escort, Fiesta, Orion). Fits VW brake fittings on models from 1980 on.
RRP £5.99 Our Price £2.03
Satin finish Chrome Vanadium socket with knurled ring. Chrome Molybdenum hex shaft. Suitable for the removal of brake calliper fasteners on Ford Mondeo, Escort Mk3, Fiesta Mk2, Orion and Sierra. Also essential for brake pad replacement on BMW 3 (rear) and 5 series and valve adjustment on Audi 80, VW Golf, Passat, Polo, Sirocco. 1/2Sq drive. Warning: Not for use with impact type ratchets.
RRP £19.99 Our Price £10.99
Drop forged Chrome Vanadium steel with contoured shafts. Fully hardened, tempered, chrome plated and fully polished for resistance to corrosion. Flare type spanner jaw suitable for most common sizes of compression joint fittings. Three spanners cover six sizes.
RRP £25.99 Our Price £15.99
Suitable for most automotive applications. Bends pipe without crushing walls. Will bend (dia)6, (dia)8 and (dia)10mm ((dia)1/4, (dia)5/16 and (dia)3/8) tube up to 90degree.
RRP £7.99 Our Price £4.08
Die-cast cutter body with heavy-duty HSS hardened cutting wheel. Smooth screw action for clean cutting performance.
RRP £343.99 Our Price £287.99
The approved method of testing the water content of brake fluid. Just 3% of moisture can lower the brake fluid boiling point by over 100degreeC. The best way to detect this small water content is to measure the boiling point of the fluid. The unit incorporates a heater element, an LCD display and a power lead for use on 12Volt DC power supplies. Works on DOT 3, 4 and 5.1 specification fluids. Supplied in carry-case with full operating instructions.
RRP £6.99 Our Price £3.33
Designed to aid installation and removal of large and small T-slot anti-rattle washers found in drum brake assembly. Features large viewing cut-away to allow correct alignment of washer. Simple push and twist action.
RRP £10.99 Our Price £5.99
Alloy body with steel clamp arm. Compact design allows use in confined spaces. Rounded jaw edges prevent damage to internal hose reinforcement. Suitable for use on fuel, vacuum and brake hoses.
RRP £11.99 Our Price £5.99
Originally designed as a tool to remove the tab-type retaining clip on American GM brake cylinder assembly. Suitable for removal and installation of locking rings on drive shafts when removing CVJ. Replaceable tips allow use on other circlip applications.
RRP £4.55 Our Price £3.33
RRP £12.99 Our Price £7.99
Flexible drive shaft and adjustable cutting control. Fitted with 28.5mm (1-1/8) medium grade stones with adjustable capacity from (dia)20-64mm. Suitable for small brake cylinders.
RRP £97.99 Our Price £64.99
Utilises same vacuum unit as VS020. Includes reservoir top-up kit and copper-based bleed nipple lubricant.
RRP £6.99 Our Price £3.64
Composite collection bottle with magnetic locating pad. Oversized bottle reduces overfilling. Supplied with tube and connectors.
RRP £51.99 Our Price £45.99
Simple, one man operation using standard workshop air supply (90-120psi). Quick, clean and efficient. Does not require specialised brake reservoir caps. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system. Includes guidance notes.
RRP £22.99 Our Price £17.99
Brass pump assembly makes it ideal for use with brake cleaner, detergents, traffic film remover, penetrating oils and weed killer. Long 160mm nozzle enables easy and direct application of liquid exactly where it is required. Robust steel construction with 1ltr capacity container.
RRP £23.99 Our Price £13.99
Measures drum wear to ensure within manufacturers tolerance. Also aids quick set-up of shoe/drum clearance prior to re-installation of drum. Measures drums from 165 to 292mm (6-1/2 to 11-1/2). Dual Imperial and Metric scale. Knurled locking action.
Suitable for vehicles with discs all round. Retracts parking brake piston prior to installation of new pads. Five possible pin configurations, fits US and European applications. Use with 3/8 square drive ratchet wrench and extension bar. Warning: Not for use with impact type ratchets.
We use full 128-bit encryption technology to keep your order and payment details safe.
Your basket is empty
Find Product